Archives

Food, Air & Industrial – Ledathene

Food, Air & Industrial – Ledathene

Formula F45

Main Applications:

  • Pneumatic air lines for process control and instrumentation
  • Transfer of food and beverages including potable water
  • Chemical conveyance
  • Cost effective solution for corrosive environments and general industry

Features:

  • Excellent environmental stress crack resistance
  • Highly durable with wide temperature working range
  • Will not impart any taste or odour to fluids running through the tube
  • Excellent chemical resistance
  • Good flow characteristics

Material Properties:

Specific Gravity 0.92  +/- 0.02
Tensile Strength 17.0 MPa
Temperature Range -20 to 60 °C
Hydraulic Burst Pressure (minimum) 3000 kPa (450 PSI) @ 20 °C

Colours:

Black (UV Resistant)
Natural
Blue
Green
Red
Yellow

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Min. Bend radius (mm) Standard Coil (m)
F45-04 4 +0.05/-0.07 2.4 30 300
F45-06 6 +0.05/-0.10 3.75 42 300
F45-08 8 (5/16”) +0.05/-0.10 5.50 56 100
F45-10 10 +0.05/-0.10 6.80 70 100
F45-12 12 +0.05/-0.10 8.60 84 100
F45-16 * 16 (5/8”) +0.05/-0.10 11.80 120 50
F45-19 * 19 (3/4”) +0.05/-0.10 14.00 150 50
inch inch inch
F45-1/8 1/8” +.001/-.003 0.09 30 300
F45-1/4 1/4” +.001/-.004 0.16 42 300
F45-3/8 3/8” +.001/-.004 0.25 70 100
F45-1/2 1/2” +.001/-.004 0.37 84 100
* Denotes availability Black or Natural only

Recommended Temperature / Pressure Range:

º Celsius -20 0 10 20 30 40 50 60
Working PSI 250 220 180 150 120 100 90 80

Airflex

Airflex

Formula A70

Main Applications:

  • Air control systems where space is limited
  • Pneumatic lines where high fatigue resistance is required
  • Visibility of flow in fluid transfer applications
  • High vibration environments

Features:

  • Excellent flexural fatigue resistance
  • Very flexible and can withstand very tight bend radii
  • Highly abrasion resistant
  • Glass like clarity for excellent visibility
  • FDA approved

Material Properties:

Specific Gravity 1.14 +/- 0.02
Tensile Strength 41.0 MPa
Hydraulic Burst Pressure (minimum) 31 Bar / 450 Psi

Colours:

Black
Natural
Blue Tint

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Min. Bend radius (mm) Standard Coil (m)
A70-04 4 +0.05 /-0.10 2.5 25 100
A70-06 6 +0.05 /-0.10 4.0 30 100
A70-08 8 +0.05 /-0.10 5.0 40 100
A70-10 10 +0.05 /-0.10 6.5 60 50
A70-12 12 +0.05 /-0.10 8.0 80 30

Fuel, Oil & Air – Ledalon 12

Fuel, Oil & Air – Ledalon 12

Formula N12

Main Applications:

  • Transfer of fuels, oils and lubricants
  • High pressure pneumatic air lines for process control and instrumentation
  • High temperature environments
  • Where crush and fatigue resistance are require

Features:

  • Excellent resistance to solvents, hydrocarbons, oils, greases and petroleum products
  • Wide temperature and pressure working range
  • Good chemical resistance
  • Low gas permeability
  • Resistant to flexural fatigue and vibration

Material Properties:

Specific Gravity 1.02  +/- 0.02
Tensile Strength 25.0 MPa
Temperature Range -20 to 120 °C
Hydraulic Burst Pressure (minimum) 8000 kPa (1200 PSI) @ 20 °C

Colours:

Black (UV Resistant)
Natural
Blue
Green
Red
Yellow

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Min. Bend radius (mm) Standard Coil (m)
N12-04 4 +0.05/-0.07 2.25 30 300
N12-06 6 +0.05/-0.10 4.00 42 300
N12-08 8  (5/16”) +0.05/-0.10 5.50 56 100
N12-10 10 +0.05/-0.10 7.00 70 100
N12-12 12 +0.05/-0.10 8.60 84 100
N12-16 * 16 (5/8”) +0.05/-0.10 12.20 120 50
N12-19 * 19 (3/4”) +0.05/-0.10 15.00 150 25
inch inch inch
N12-1/8 1/8” +.001/-.003 0.08 30 300
N12-1/4 1/4” +.001/-.004 0.17 42 300
N12-3/8 3/8” +.001/-.004 0.25 70 100
N12-1/2 1/2” +.001/-.004 0.37 84 100
* Denotes availability in Black or Natural only

Recommended Temperature / Pressure Range:

º Celsius -20 0 10 20 40 50 65 80 95 110 120
Working PSI 700 650 625 600 450 375 250 200 125 85 60

High Pressure – Ledalon 11

High Pressure – Ledalon 11

Formula N11

Main Applications:

  • High pressure pneumatic and fluid applications
  • Short length grease lines
  • High temperature environments
  • Where crush and fatigue resistances are required

Features:

  • High pressure capability to 2500 PSI
  • Excellent resistance to greases, solvents, oils, hydrocarbons and petroleum products
  • High tensile strength
  • UV resistant (in black)
  • Low gas permeability
  • Resistant to flexural fatigue and vibration

Material Properties:

Specific Gravity 1.05  +/- 0.02
Tensile Strength 30.0 MPa
Temperature Range -20 to 120 °C
Hydraulic Burst Pressure (minimum) 17000 kPa (2500 PSI) @ 20 °C

Colours:

Black (UV Resistant)

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Standard Coil (m)
N11-04 4 +0.05/-0.07 2.4 100
N11-06 6 +0.05/-0.10 3.4 100
N11-08 8 (5/16”) +0.05/-0.10 4.8 100
N11-10 10 +0.05/-0.10 6.0 100
N11-12 12 +0.05/-0.10 7.0 100
inch inch inch
N11-1/8 1/8” +.001/-.003 0.075 100
N11-1/4 1/4” +.001/-.004 0.147 100
N11-3/8 3/8” +.001/-.004 0.224 100
N11-1/2 1/2” +.001/-.004 0.303 100

Recommended Temperature / Pressure Range:

º Celsius -20 0 10 20 40 50 65 80 95 110 120
Working PSI 1100 1075 1050 1000 800 650 525 350 225 150 100

Bevpure

Bevpure

Formula B50

Main Applications:

  • Transfer of beer, soft drinks, potable water and juices
  • Visual monitoring of fluid flow
  • Low pressure transfer of solids and gases
  • Very low out gassing – will not impart odour or taste to fluids
  • Where high flexibility and tight bend radii are required

Features:

  • Taste tested to confirm “no taint” to carried fluids
  • High flexibility
  • Very resilient to impact and kink
  • Resistant to a wide range of chemicals
  • FDA approved
  • Phthalate and BPA free

Material Properties:

Specific Gravity 0.885 +/- 0.02
Tensile Strength 17.5 MPa
Hydraulic Burst Pressure 10 Bar / 150 Psi

Colours:

Natural

Product Specifications:

Product Code Inside Diameter (mm) Tolerance (mm) Nominal OD (mm) Standard Coil (m)
B50-04 4.0 +0.05 /-0.10 9.0 30
B50-06 6.0 +0.05 /-0.10 9.0 30
B50-08 8.0 +0.05 /-0.10 13.0 30
B50-10 10.0 +0.05 /-0.10 15.2 30
B50-12.7 12.7 +0.05 /-0.10 18.0 30

Lab

Lab

Formula L60

Main Applications:

  • Excellent alternative for PVC and glass tubing in laboratory and pharmaceutical applications
  • Water and beverage dispensing where high flexibility is required
  • Suitable for exposure to herbicide, pesticide and fertiliser products

Features:

  • Can be moulded to shape using gentle heat
  • High flexibility
  • Good impact strength and low temperature performance
  • Resistant to grease and oils
  • FDA approved
  • Can be joined by heat fusion

Material Properties:

Specific Gravity 0.94 +/- 0.02
Tensile Strength 24.0 MPa
Temperature Range -20 to +60 °C
Hydraulic Burst Pressure (minimum) 17 Bar / 250 Psi
Working Pressure (maximum) 7 Bar / 100 Psi

Colours:

Natural

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Standard Coil (m)
L60-04 4.00 +0.05 / -0.07 2.50 100
L60-06 6.00 +0.05 / -0.07 4.00 100
L60-08 8.00 +0.05 / -0.10 5.00 100
L60-10 10.00 +0.05 / -0.10 6.50 100
L60-12 12.00 +0.05 / -0.10 8.00 100

Ultrachem

Ultrachem

Formula U80

Main Applications:

  • Exposure to very caustic and corrosive chemicals
  • High demand on mechanical properties
  • Extreme temperature environments
  • Semiconductor and pharmaceutical industries

Features:

  • Extreme chemical resistance
  • High temperature capabilities
  • Excellent environmental stress crack resistance
  • Low co-efficient of friction
  • Chemically inert – very high purity
  • FDA approved

Material Properties:

Specific Gravity 2.15  +/- 0.02
Tensile Strength 27-32 MPa
Temperature Range up to 260 °C
Hydraulic Burst Pressure (minimum) 10 – 30 Bar

Colours:

Natural

Product Specifications:

Product Code Outside Diameter  mm Nominal Inside Diameter mm Working Pressure @ 20 deg C (bar) Minimum Bend Radius  mm
U80-06 6.0 4.0 30 30
U80-08 8.0 6.0 14 65
U80-10 10.0 8.0 10 80
U80-12 12.0 9.0 9 90
Product Code Outside Diameter  inches Nominal Inside Diameter mm
U80-1/4 1/4″ 4.25
U80-3/8 3/8″ 7.50
U80-1/2 1/2″ 9.70

Chemflex

Chemflex

Formula C20

Main Applications:

  • Lightweight alternative to PVC and rubber tubing
  • Exposure to acids, alkalis and cleaning fluids
  • Peristaltic pump dispensing
  • Hot beverage dispensing

Features:

  • Excellent flexural fatigue resistance
  • Excellent wear and abrasion resistance
  • Ozone and UV resistant
  • High resistance to chemical attack (including common cleaning fluids and sanitisers)
  • Can withstand sanitation in autoclave and gamma radiation exposure

Material Properties:

Specific Gravity 0.95 +/- 0.02
Tensile Strength 6.8 MPa
Temperature Range -20 to +80 °C
Hydraulic Burst Pressure (maximum) 5 Bar / 75 PSI

Colours:

Natural

Product Specifications:

Product Code Outside Diameter (mm) Tolerance (mm) Nominal ID (mm) Standard Coil (m)
C20-04 4.00 +0.05 / -0.10 2.5 100
C20-06 6.00 +0.05 / -0.10 3.0 100
C20-08 8.00 +0.05 / -0.10 4.0 100
C20-10 10.00 +0.05 / -0.10 5.0 50
C20-12 12.00 +0.05 / -0.10 6.0 50

Easyflow

Easyflow

Formula E99

Main Applications:

  • Transfer of beverages and potable water
  • Visual monitoring of fluid flow
  • Wet or dry foodstuff handling
  • Low pressure pump discharge lines
  • Where high flexibility is required

Features:

  • Smooth bore for excellent flow characteristics
  • Transparent with blue tint for a clear view of fluid flow
  • Very resilient to impact and kink
  • Resistant to dilute acids and alkalis
  • Safe for food contact – AS2070 Compliant
  • Corrosion and abrasion resistant

Material Properties:

Specific Gravity 1.23 +/- 0.02
Tensile Strength 19 MPa
Temperature Range -15 to +60 °C
Hydraulic Burst Pressure (maximum) 7 Bar / 100 Psi

Colours:

Transparent Blue Tint

Product Specifications:

Product Code Inside Diameter (mm) Outside Diameter (mm) Standard Coil (m)
E99-03 3.0 5.0 30
E99-05 5.0 8.0 30
E99-55 5.5 9.0 30
E99-06 6.0 9.0 30
E99-08 8.0 11.0 30
E99-10 10.0 13.0 30
E99-12 12.0 16.0 30
E99-16 16.0 20.0 30
E99-19 19.0 23.0 30
E99-25 25.0 31.0 30
E99-32 32.0 37.0 30
E99-40 40.0 47.0 15
E99-50 50.0 58.0 15

Spiral Wrap

Versatile Cable and Hose Protection

Spiral wrap provides protection and harnessing of single and multiple cable/hose bundles.  Spiral wrap allows for easy breakouts and branching of the wrapped bundle.  This handy product is manufactured from low density polyethylene and offers excellent resistance against abrasion, rubbing and unwanted contact on the bundled contents.  Ideally suited for use in the home and office, pneumatic, electrical, marine, transportation and hydraulics industries.  UV resistant in Black.

Material Properties:

Specific Gravity 0.9 +/- 0.02
Tensile Strength 17.0 MPa
Elongation at Break 550%

Colours:

Black
Natural*
Orange*
*by special order only

Product Specifications:

Product Code Outside Diameter (Nominal mm) Coil Length (m)
ST 6 6 15
ST 8 8 15
ST 10 10 15
ST 12 12 15
ST 16 16 15
ST 19 19 15
ST 25 25 15
ST 32 32 15
ST 38 38 15
ST 50 50 15

Recommended Temperature Range:

º Celsius -20 0 10 20 30 40 50 60